• TSX: GSV  $0.73
  • GOLD: US  $
  • Projects

    Outcropping Pinion Deposit Jasperoids

Pinion Drilling

A total of 16,206m of drilling in 60 reverse-circulation holes (RC) and 15 metallurgical core holes has been completed in 2020. Final results have been returned for 24 RC holes; all other RC and core results are pending. Oxide results include 42.7m of 0.92 g Au/t, including 7.6m of 2.69 g Au/t in hole PR20-14; 38.1m of 0.97 g Au/t in PR20-15; 64.0m of 0.81 g Au/t, including 22.9m of 1.20 g Au/t in hole PR20-19; and 29.0m of 0.77 g Au/t, including 12.2m of 1.28 g Au/t in PR20-23. The data to date suggests that targeted inferred resources are likely to be successfully upgraded for inclusion in reserves..

The 2020 drilling program was mostly an infill and geotechnical program designed to reduce drill spacing to approximately 30 meters in critical portions of the deposit and provide additional core for metallurgical, geotechnical and HPGR test work.

Drill Hole Assay Tables*

*The gold intervals reported in these assay tables are based on a 0.14 gpt Au cut-off. Weighted averaging has been used to calculate all reported intervals. The reported gold intervals may, or may not represent true thicknesses and, or widths. In general, the gold distribution within these large, complex breccia bodies tends to be irregular and will require additional drilling to establish true widths. Sampling Methodology, Chain of Custody, Quality Control and Quality Assurance: All sampling was conducted under the supervision of the Company’s project geologists and the chain of custody from the project to the sample preparation facility was continuously monitored. A blank or certified reference material was inserted approximately every tenth sample. The North Dark Star core and RC samples were delivered to Bureau Veritas Mineral Laboratories preparation facility in Elko, NV. The samples are crushed, pulverized and sample pulps are shipped to Bureau Veritas certified laboratory in Sparks, NV or Vancouver, BC. Pulps are digested and analyzed for gold using fire assay fusion and an atomic absorption spectroscopy (AAS) finish on a 30-gram split. All other elements are determined by ICP analysis. Data verification of the analytical results includes a statistical analysis of the standards and blanks that must pass certain parameters for acceptance to insure accurate and verifiable results.

Please see disclaimer below.

©2021Gold Standard Ventures Corp.
All rights reserved.